Free shipping on orders over £30
Shop ALL

Published 03 Nov 2016

Chimney Sheep provide the perfect solution to keep the winter chills out of your home

As the outside temperature drops, it’s safe to say we’ve all been feeling the chill in the air this week. Chimney Sheep offer an effective and affordable solution to keep cold draughts out and the warmth into your home this winter.

For the first time since Summer waved goodbye, most of us have woken up to a frost on the ground and a chill in the air this week. Many people are unaware of the heat and energy loss associated with open chimneys.

The average home loses around 4% of household heat through an open chimney – leading to unnecessary energy usage and an unpleasant draught indoors.

How often do you look up your chimney? It’s a part of the house that generally gets ignored, but if you’ve got an open chimney then it’s like leaving a window open all the time.

This can lead to all kinds of problems, from letting warm air out in the winter, letting hot air in during the summer, to acting as a conduit for wildlife, noise, and dirt into your home.

There’s a new product on the market, made of a thick layer of felted UK Wool on a handle, that lodges in the throat of the chimney and effectively “closes” the open gap. Appropriately enough, it is called a Chimney Sheep®.

The payback on a Chimney Sheep® is around 6 months, compared to 142 years for Double Glazing!

The benefits of a Chimney Sheep are:

  • It prevents warm air from your central heating from escaping up the chimney
  • It prevents cold air being pulled in from around doors and windows to replace the escaped warm air, noticeably reducing cold draughts
  • It stops dirt and debris from falling down the chimney
  • It prevents wildlife from finding its way down the chimney
  • It prevents hot air from coming down the chimney during the summer months
  • It prevents bad smells from wafting down the chimney.
  • It blocks out noise

    Starting at just £16.00, The Chimney Sheep is available in nine different sizes, available from various online stores, including www.chimneysheep.co.uk, Amazon, and B & Q’s website www.DIY.com

    Photo Credit: david muscroft / Shutterstock.com

    Sally Phillips

    Inventor of Chimney Sheep

    chimney draught excluder
    chimney sheep
    draught excluder
    draught proofing
    draughts
    eco-living
    energy bills
    energy savings
    green home
    heating
    home improvements
    insulation
    money saving tips
    stack effect
    winter
    wool
    PlanetCare Microfibre Filter Starter Kit

    PlanetCare Microfibre Filter Starter Kit

    44.00 GBP

    How does it work?

    This ingenious washing machine microfibre filter kit uses cartridges to physically catch and retain the fibres that come loose when you wash your laundry. Each cartridge will last around 15-20 loads of laundry and is easily replaceable in just a couple of minutes.

    Fibre retention is based solely on physical retention with the help of clever patent-pending technology.

    You can also send the used cartridges back to us and we'll forward them on to PlanetCare. They will ensure that they are reused or recycled.  This ‘closed loop’ system ensures that there is minimum wastage throughout the whole process.

    Something to think about:

    Doing the laundry can have a huge environmental impact, whether that be using tonnes of energy running the washing machine and tumble drier - or the pollutants that are released from the products you use. Using a microfiber filter is just one way of reducing that impact. Why not make a few more changes - we've tonnes of handy tips in our blog.

     

    What's in the box?

    You'll get everything you need to fit your PlanetCare washing machine filter with these handy starter kits, meaning you can get it in place and start catching microfibers straight away.

    The Mini Starter Kit includes:

    • 1 housing top with a cup, 1 holder, 4 screws, 1 tube (1.5m), 1 silicone lubricant, 1 counter, and 3 filter replacement cartridges.
    •  3 cartridges. These can last up to 60 washes.

    The XL Starter Kit includes:

    • 1 housing top with a cup, 1 holder, 4 screws, 1 tube (1.5m), 1 silicone lubricant, 1 counter, and 3 filter replacement cartridges.
    • 13 cartridges. These can last up to 260 washes.

      Note: All the filter cartridges are 100% recycled and refurbished for use again and again via a closed-loop service.

         

        Is it easy to install?

        The microfiber filter is very easy to install. In fact, for most washing machines this process takes less than 10 minutes. The filters are compatible with all types of washing machines.

        There's actually a handy how-to video and a useful installation guide  you can take a peek at if you need a little bit more guidance.

        It’s a good idea to position it high enough above the floor/surface so the cover can be removed to change the filter and position the device so that it is easy to screw the cover back after each filter change.

        Please note: you will need 13 cm on the side of the washing machine and approx. 60 cm in height clearance so that you will be able to easily unscrew the housing and change the filter comfortably.

        The filter must be placed outside the washing machine on the drain hose. It should not be raised above the height of the drain hose exiting the washing machine. The hose length should be held to a minimum. Raising the filter and a long drain hose will both reduce the efficiency of pumping and filtering and should be avoided.

         

        What are the dimensions of the filter housing?

        The filter housing alone, without any attachments, measures the following:

        • height 325 mm, width (hose attachment direction) 122 mm, and depth 130 mm.

         

        Is the microfiber filter easy to use?

        For the first load, just make sure the filter cover is replaced correctly and screwed tight before using the washing machine. Try a short wash and make sure all connections and covers are fixed and watertight.

        It’s also a good idea to hold the top of the device when replacing the filter cover to avoid putting pressure on the bracket fixings when unscrewing the cover.

        After that, you do not need to do anything until the cartridge is full.

        >Easy!

         

        How does the closed-loop system work?

        When your cartridge is full you can send it back to us directly, simply go onto the delivery website Parcel2Go and produce a label to send the cartridges to us, don't forget to include your order details as we'll refund you the postage cost. We then send these off to PlanetCare who disassemble the cartridge and remove the fibres and filtering medium.  This is done in a controlled environment, ensuring that caught fibres do not pollute water or the environment.

         

        What does Planetcare do with the fibres?

        >At the moment PlanetCare is safely storing the used filtered materials. Once they have sufficient quantity, they will reuse/recycle it all. At the moment they are planning to reuse the materials by converting them into insulation mats. But, they're always on the lookout for viable solutions and will choose the best available option to reuse/ recycle the fibres.

        The waste will never be burned or sent to a landfill!

        The remainder of the cartridge is cleaned, and fitted with a new filtering medium ready to be used again.

        Read More